1.
Centre the cap tally with the first 'S' of Scouts directly below
the front seam of the cap. At the left hand seam of the cap,
tie an overhand knot making sure that the tally does not move.
 |
2.
Form a bight by bending over the upper tail and folding it back
on itself
 |
3.Take
the lower tail an pass it under and then over this bight such
that the tails end up next to each other.
 |
4.
A bight is now formed in the right hand tail and should be tucked
behind the first bight just before the centre of the bow.
 |
5. Carefully tighten
the knot, being careful to ensure that the bows are of the same
length and are not too long.
 |
6.
The tails can now be cut to the same length as the bows with
the ends being trimmed at an angle.
 |
